Question: Why Do You Connect The Positive Terminal First?

What happens if you connect the negative terminal first?

The negative cable is connected to the body/chassis of the car.

If you connect the negative first, then the positive, if you happen to touch the wrench to something metal while it is touching the positive terminal, that’s a short – because the chassis is already connected to the negative battery terminal..

Do you connect positive to negative?

Find the batteries and their terminals. Each battery has two metal terminals. One is marked positive (+), the other negative (-). … Never connect the red cable to the negative battery terminal or a vehicle with a dead battery.

Which side of the battery goes on the spring?

Assuming you’re talking about round-type (cylindrical) batteries, such as D, AA and AAA, it’s to ensure maximum contact with the flat end of the battery, which is the “negative” terminal as described in the ANSI standard. You’ll commonly see leaf-spring contacts as well as coils.

Why is my battery sparking when I hook it up?

The battery cables can spark if the cables are installed in the improper order. When attaching the battery cables, place the positive cable on first and then the ground cable. … Also, the ground, or negative cable, should not be touching anything metal while the positive cable is hooked up.

What happens if you connect positive to negative on a battery?

Connecting the positive terminal of each battery to the negative terminal of the other battery will result in a huge surge of electrical current between the two batteries. … The heat can melt internal and external battery parts, while the pressure from the hydrogen gas can crack the battery casing.

Do you connect the positive or negative terminal first?

When disconnecting the cables from the old battery, disconnect the negative first, then the positive. Connect the new battery in the reverse order, positive then negative.” When you are replacing your car battery, It isn’t always easy to remember the order in which to disconnect and reconnect the terminals.

What happens if you take the positive terminal first?

It can fall across either terminal and the car and nothing will happen. If you disconnect the positive terminal first and you drop a spanner, it is possible for it to fall across the positive terminal and any earth on the car, with spectacular and possible dangerous results.

Why do you connect positive to positive?

A battery’s positive terminal does have a positive potential. ie, a test positive charge will repel it and a test negative charge will attract it. … Given ‘point 1’, above, connecting the positive terminal of battery A to negative terminal of battery B will lead to current flow in the conductor.

Which terminal should you disconnect first?

Always work on the negative terminal before the positive when you disconnect your battery. Grab a socket from your socket kit and hold it near, but not against, the nut on the negative terminal of your battery.

When connecting a battery which terminal should be connected first?

The positive (red) cable should be attached to the positive terminals on each battery. The negative (black) cable should have one end attached to the negative terminal of the dead battery, and one end grounded.

Where does the positive battery cable connect to?

Usually the negative battery cable will be bolted to the engine or somewhere on the vehicle’s frame, while the positive battery cable will usually be bolted to the starter or a fuse box.

Can you just disconnect the positive terminal?

Just be careful and ALWAYS disconnect the POSITIVE terminal first. Keep the battery grounded (negative is ground). Try not to touch the positive wire on metal as it possibly could be holding some charge after you disconnect it.